Assembly Maintenance Technician

SUMMARY

Repairs and maintains machinery and equipment such as motors, conveyor systems, and production machines and equipment by performing the following duties. General Responsibilities include but are not limited to the following Clean photoelectric equipment with contact cleaner. Remove and rebuild escapements by disassembling and replacing worn parts. Dismantle air cylinders and rebuild by replacing worn parts. Locate and repair pneumatics leaks. Locate and repair electrical faults with a multimeter. Adjusting feeding tracks and escapement by adding or removing shims. Adjust tube cut by turning adjustment wheel. Adjusting tube bin by increasing or decreasing the width. Replace motors, motor control and clutches. Trouble-shoot and repair electric motors. Replace conveyor belts by removing and disassembling conveyors. Adjusting Syntron feeder speed by increasing or decreasing power percentage. Adjusting air cylinder's speed by adjusting flow controls. Clean parts bowls by removing parts and wash with cleaning fluid. Replace cut-off blade by disassembling cutter escapement. Remove parts jam by pulling bad parts out with required tool. Clean parts using solvents. Trouble-shoot with programmer using keyboard. Rebuild assembly equipment to upgrade for scrap reduction, quality improvements, etc. Develop cost savings ideas and implement same.

SAFETY AND ENVIRONMENTAL

All employees are expected to act in a safe manner at all times and ensure that those around them do not put themselves or others at risk. Everyone is personally accountable for his/her own safety as well as their co-workers. Safety and health is a shared responsibility of everyone in the organization and a condition of employment. We value and expect engagement out of all employees.

Co-workers share the responsibility for doing the right thing for the environmentand carrying out the stewardship principles addressed in our EnvironmentalPolicy. We will provide the resources necessary to implement this policy, and management will conduct periodic reviews to ensure its ongoing effectiveness

ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.

• Observe equipment in operation and evaluate potential problems for future repairs.
• Dismantle equipment to gain access to and remove defective parts.
• Adjust function parts of equipment and control instruments.
• Repair or replace defective parts.
• Install special functional and structural parts in equipment.
• Lubricate and clean parts.
• Start equipment to test their performance.
• Set up and operate lathe, drill press, grinder, and other metalworking tools to repair or make spare parts.
• Repair electrical equipment.
• Must follow all work rules and policies

QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

EDUCATION and/or EXPERIENCE

One to three months related experience and/or training. Must pass skills assessment.

LANGUAGE SKILLS

Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization.

MATHEMATICAL SKILLS

Ability to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference, and volume. Ability to apply concepts of basic algebra and geometry.

REASONING ABILITY

Ability to apply commonsense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to handle problems involving several concrete variables in standardized situations.

PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties of this job the employee is regularly required to stand, walk, talk and hear. The employee is frequently required to use hands to finger, handle, or feel; reach with hands and arms; climb or balance; and sit, bend, stoop, twist, kneel, squat, or crawl. The employee is occasionally required to sit and taste or smell. The employee must regularly lift and/or move up to 25 pounds, frequently lift and/or move up to 50 pounds, and occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus.

WORK ENVIRONMENT

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

COMMENTS

Must be able to work mandatory overtime. The regular schedule for this position exceeds eight hours per day, 40 hours per week. Additional overtime is assigned as needed.

LIMITATIONS AND DISCLAIMER

The above job description is meant to describe the general nature and level of work being performed; it is not intended to be construed as an exhaustive list of all responsibilities, duties and skills required for the position.

All job requirements are subject to possible modification to reasonably accommodate individuals with disabilities. Some requirements may exclude individuals who pose a direct threat or significant risk to the health and safety of themselves or other employees.

This job description in no way states or implies that these are the only duties to be performed by the employee occupying this position. Employees will be required to follow any other job-related instructions and to perform other job-related duties requested by their supervisor in compliance with Federal and State Laws.

Requirements are representative of minimum levels of knowledge, skills and/or abilities. To perform this job successfully, the employee must possess the abilities or aptitudes to perform each duty proficiently. Continued employment remains on an "at-will" basis.

Silgan is an Equal Opportunity Employer. We consider applicants for all positions without regard to race, color, religion, sex, national origin, age, marital status, or the presence of a disability, which would not prevent the performance of essential job duties with, or without reasonable accommodation of any other protective status.

Silgan is a drug-free workplace.